Home > Learning Center > Ion Paintball Gun

Ion Paintball Gun

The body kit on an ion paintball gun can be changed, but the proper steps must be followed.

• Take off all of the sources. Also remove the paintballs, the hopper and the barrel.

• There should be four screws that are being used to hold on the grip of the ion paintball gun. Remove them and then unhook the battery from the gun.

• There will be two more screws that hold the grip frame to the paintball gun body. They are silver and should also be unscrewed. Just after this, remove the black screw that is visible from the top of the ion around the area where the barrel attaches.

• Get an allen wrench and begin to carefully separate the body from the grip frame. Use the allen wrench to remove the three banjo fittings from the body and grip frame. Unplug the eye wire from the gun body.

• Slide the body kit all the way off of the ion paintball gun and then place the new body kit over the metal body and reattach the fittings and put the gun back together as it was before.

• Grab the regulator and make sure it is unscrewed from the gun. Then, pull the regulator cover off and slide a new one on. After you have finished this, replace the regulator.